Sale
Flue Flashing Kit's
Bell tent flue flashing kit for wood burners & stoves
FLA-45:
- This kit is OVAL, NOT circular!
- 2 predrilled circular clamping rings
- 1 pre-drilled silicone seal
- 8 wing nuts
- 16 washers
- Width / 220mm
- Length / 310mm
- Clamping Plate width - 50mm
- Maximum Flue Pipe Size 100mm -110mm
- Find magnetic thermostats in our store
FLA-Mini:
- NOT suitable for our double-wall pipes!
- For flue pipes from 45- 85mm
- 2 predrilled circular clamping rings
- 1 predrilled silicone seal
- 6 bolts and screws
- 12 washers
- Circle - 112mm total circumference
- Clamping Plate width - 21mm
FLA-Large:
- 2 predrilled circular clamping rings
- 1 predrilled silicone seal
- 6 bolts and screws
- 12 washers
- Circle - 240mm total circumference
- Clamping Plate width - 21mm
Our Bell Tent Flue Flashing Kit For Wood Burners & Stoves is a perfect piece of kit, used for Bell Tents, Tipi's Yurts, log cabins, sheds, boats, boathouses, summerhouses, workshops, garages, and many other applications.
Our Wood burner, stove Flashing Kit allows you to safely install a wood burner/stove in a location that suits you. Specially designed for use in Bell tents, yurts, tipi boats, cabins, and much more.
Specially formatted high heatproof silicone rubber enables up to a 45-degree angle on exit which makes this flashing perfect for most installs.
The new pre-drilled clamp allows for easy installation on fireproofed fabrics that are often Bell tents, Yurts, Tipi, etc. Simply unscrew the 2 clamping plates, and reconnect after cutting your screw holes in the fabric for a fast and pleasant installation. 10mins.
Operating temperature
- Safe operating 100° degrees - Max 200 ° (Short period of time).
- A flashing kit should be installed with a minimum distance of 110-120cm from the stove to allow sufficient cooling. We advise that all flue pipes should be fitted with a double wall heat reducer flue attachment when using this product! (We have these available to order).
- Always wear gloves when installing the kit. May have sharp edges on the inner plate. Find magnetic thermostats in our store to ensure that you are not overheating your flue pipes.
Disclaimer
This item must be used with a heat reducer or installed at a distance of at least 150cm from the stove body.We can not be held liable for your flashing kit cracking or splitting caused by overheating.
We do not accept any liability for loss or damage incurred by the use of the flashing kit howsoever caused.
We do not accept any liability for loss or damage incurred by the use of the flashing kit howsoever caused.
We have gone paperless!
Below is the link to our instruction manuals:
https://belltentvillage.co.uk/pages/instruction-manuals
Thank you for choosing our wood burning stove flashing kit.
By using our wood burning stove flashing kit, you acknowledge that you have read, understand, and agree to these terms and conditions. If you do not agree to these terms and conditions, do not use the product.
Before using this product, please read and agree to the following terms and conditions:
- Our wood burning stove flashing kit is intended for use only with a heat reducer or an insulating barrier that is designed to reduce the heat transfer from the flue pipes to the flashing kit. If the flashing kit is installed directly onto flue pipes without a heat reducer or insulating barrier, we cannot be held liable for any damage that may occur, including but not limited to splitting or melting of the flashing kit.
- The user assumes full responsibility for the proper installation and use of the wood burning stove flashing kit. It is the user's responsibility to ensure that the installation meets all applicable codes, standards, and regulations.
- Any modifications or alterations made to the flashing kit may result in the invalidation of the warranty and may increase the risk of damage or injury. We cannot be held liable for any damage, injury, or loss that may result from the use or misuse of the wood burning stove flashing kit, including but not limited to property damage, personal injury, or death.
- The user agrees to indemnify, defend, and hold us harmless from any and all claims, damages, expenses, or other liability arising out of or in connection with the use or misuse of the wood burning stove flashing kit.
- Our liability for any claim arising out of or in connection with the sale, use, or performance of the wood burning stove flashing kit shall be limited to the purchase price of the product.
- We reserve the right to modify these terms and conditions at any time without prior notice.
Customer Reviews
3.0 Based on 1 Reviews
Filter Reviews:
MN
United Kingdom
07/22/2020
Incorrect item
I ordered the item shown in the picture which is a 45 degree round flue flashing. The item what arrived was an oval flashing kit which is a lot larger than the picture shown and I will have to make a bigger hole in my tent which I’m not all that happy about
08/19/2020
BellTentVillage
Hey Matthew Sorry for the misunderstanding with the flue flashing kit, but it does state that this item is oval in the items description. :-).