Burning Stove

Our new BTV Eco 5K Multi Outdoor Wood Burning Stove Oven really does pack a punch. Kicking out around 3-5kw of heat once fully loaded and in full swing, this stove will provide all the heat that you'll need.

Designed to be small and weighing under 15kg makes this stove perfect for a permanent fixing or mobile use. With a body width of just 58cm and a total height of just 40cm, this stove is perfect for Bell Tents, garages, workshops, tents and much more. The stove will heat a 6x6 ventilated room within 20mins and a 5m Bell Tent within 10.  

Built with solid legs to add extra stability on unstable ground, the eco 5k multi outdoor wood burning stove small and compact stove is perfect for all outdoor heating needs. 

Designed with a built in air flow gauge allows for an efficient eco usage allowing the fuel to last longer. A smart built in front air dial for easy to use temperature control will allow you to adjust the temperature of the stove as desired.

This stove goes one step further with it's built in oven compartment and water tank holder allowing for tea on tap!

We have also added a small hot plate for heating your kettle.

Operating temperature up to 600 degrees. 

Complete with a 60mm Stainless Steel Flue Pipe.  5 Sections 40cm per section. 

Built in spark arrestor 

Important

(Please note that the body of this stove can get very hot) A cage should be put around this stove at all times.

The stove should never be used in a closed environment. Sufficient ventilation is required at all times.  

Never operate without a working smoke alarm or carbon monoxide detector. 

Never leave the stove burning un-attended

We hold no liability for harm caused whilst using this stove. It is made for outdoor recreational purposes only. 

Our new BTV 3K Compact Outdoor Wood Burning Stove really does pack a punch. Kicking out around 3-5kw of heat once fully loaded and in full swing, this stove will provide all the heat that you'll need.

Designed to be small and weighing under 15kg makes this stove perfect for a permanent fixing or mobile use. With a body width of just 15cm and a total height of just 50cm, this stove is perfect for Bell Tents, garages, workshops, tents and much more. The stove will heat a 6x6 ventilated room within 20mins and a 5m Bell Tent within 10.  

Built with a solid metal earth plate to add extra stability on unstable ground, this small and compact stove is perfect for all outdoor heating needs. 

Designed with a built in damper to the rear of the stove helps regulate the air flow much better than other models on the market allowing the fuel to last longer. A smart built in front air dial for easy to use temperature control will allow you to adjust the temperature as you desire.

Load fuel from the top and close. Light a fuel lighter in the pull out ash tray and your away. 

We have also added a small hot plate for heating your kettle.

Operating temperature up to 600 degrees. 

Complete with a 60mm Stainless Steel Flue Pipe.  5 Sections 40cm per section. 

Built in spark arrestor 

Important

(Please note that the body of this stove can get very hot) A cage should be put around this stove at all times.

The stove should never be used in a closed environment. Sufficient ventilation is required at all times.  

Never operate without a working smoke alarm or carbon monoxide detector. 

Never leave the stove burning un-attended

We hold no liability for harm caused whilst using this stove. It is made for outdoor recreational purposes only. 

Our new BTV Eco 4K Chill Outdoor Wood Burning Stove really does pack a punch. Kicking out around 3-5kw of heat once fully loaded and in full swing, this stove will provide all the heat that you'll need.

Designed to be small and weighing under 15kg makes this stove perfect for a permanent fixing or mobile use. With a body width of just 25cm and a total height of just 50cm, this stove is perfect for Bell Tents, garages, workshops, tents and much more. The stove will heat a 6x6 ventilated room within 20mins and a 5m Bell Tent within 10.  

Built with solid legs to add extra stability on unstable ground, the eco 4k chill outdoor wood burning stove small and compact stove is perfect for all outdoor heating needs. 

Designed with a built in air flow gauge allows for an efficient eco usage allowing the fuel to last longer. A smart built in front air dial for easy to use temperature control will allow you to adjust the temperature of the stove as desired.

We have also added a small hot plate for heating your kettle.

Operating temperature up to 600 degrees. 

Complete with a 60mm Stainless Steel Flue Pipe.  5 Sections 40cm per section. 

Built in spark arrestor 

Important

(Please note that the body of this stove can get very hot) A cage should be put around this stove at all times.

The stove should never be used in a closed environment. Sufficient ventilation is required at all times.  

Never operate without a working smoke alarm or carbon monoxide detector. 

Never leave the stove burning un-attended

We hold no liability for harm caused whilst using this stove. It is made for outdoor recreational purposes only. 

Large Bell Tent Flue Flashing Kit For Wood Burners & Stoves

Our Wood burner, stove Flashing Kit allows you to safely install a wood burner / stove in a location that suit you. Specially designed for use in Bell tents, yurts, tipi boats, cabins and much more.

Specially formatted high heat proof silicone rubber enables up to 45 degree angle on exit which makes this flashing perfect for most installs. 

This flashing works well with pipe sizes from 75 mm and fits up to 95 mm pipe very easily without cutting. 

The new pre-drilled clamp allows for easy installation on fireproofed  fabrics that are often Bell tents, Yurts, Tipi etc. Simply unscrew the 2 clamping plates, and reconnect after cutting your screw holes in the fabric for a fast and pleasant installation. 10mins. 

Flashing cutting markers - will fit the following flue pipe sizes

95mm- 114mm 

114mm- 133mm

133mm -146mm

146mm - 160mm

The silicone collar is suitable for temperatures of up to 300 degrees,

The kit contains:

• 2 predrilled circular clamping rings
• 1 predrilled silicone seal
• 6 bolts and screws
• 12 washers

We do not accept any liability for loss or damage incurred by use of the flashing kit howsoever caused.

45º Angle Bell Tent Stove Wood Burner Flue Flashing Kit

45º Angle Bell Tent Stove Wood Burner Flue Flashing Kit a perfect piece of kit ,used for Bell Tents, Tipi's Yurts, log cabins, sheds, boats, boat houses, summerhouses, workshop, garages and many other applications. 

Our Wood burner, stove Flashing Kit allows you to safely install a wood burner / stove in a location that suit you. Specially designed for use in Bell tents, yurts, tipi boats, cabins and much more.

Specially formatted high heat proof silicone rubber enables up to 45 degree angle on exit which makes this flashing perfect for most installs. 

This flashing works well with pipe sizes from 60 mm and works well with the  4" traveller stove flues. (The frontier and outback stove flues have a 60 mm flue). 

The new pre-drilled clamp allows for easy installation on fireproofed  fabrics that are often Bell tents, Yurts, Tipi etc. Simply unscrew the 2 clamping plates, and reconnect after cutting your screw holes in the fabric for a fast and pleasant installation. 10mins.   

Flashing cutting markers - will fit the following flue pipe sizes

95mm- 114mm

114mm- 133mm

133mm -146mm

146mm - 160mm

The silicone collar is suitable for temperatures of up to 300 degrees,

The kit contains:

• 2 predrilled circular clamping rings
• 1 pre-drilled silicone seal
• 8 wing nuts
• 16 washers

We do not accept any liability for loss or damage incurred by use of the flashing kit howsoever caused.

Bell Tent Flue Flashing Kit For Wood burners & Stoves

Bell Tent Flue Flashing Kit a perfect piece of kit ,used for Bell Tents, Tipi's Yurts, log cabins, sheds, boats, boat houses, summerhouses, workshop, garages and many other applications. 

For flue pipes from 45- 85mm

Our Bell Tent Flue Flashing Kit are designed for use on popular Bell Tent wood burners and stoves.  Our Bell Tent Flashing Kit allows you to safely install a wood burner / stove in a location that suit you. Also designed for use in, yurts, tipi boats, cabins and more.

Specially formatted high heat proof silicone rubber enables up to 45 degree angle on exit which makes this flashing perfect for most installs. 

This Bell Tent Flue Flashing Kit works well with pipe sizes from 60mm and fits standard sized exhaust pipe 63.5mm very easily without cutting. 

The new pre drilled clamp allows for easy installation on fireproofed  fabrics that are often Bell tents, Yurts, Tipi etc. Simply unscrew the 2 clamping plates, and reconnect after cutting your screw holes in the fabric for a fast and pleasant installation. 10mins.  

The silicone collar is suitable for temperatures of up to 300 degrees,

The kit contains:

• 2 predrilled circular clamping rings
• 1 predrilled silicone seal
• 6 bolts and screws
• 12 washers

We do not accept any liability for loss or damage incurred by use of the flashing kit howsoever caused.

Shipping

UK 1-3 working days

Europe 5- 10 working days

Rest of the World 10 – 20 working days