Best selling products

60mm Single Wall Stove Flue Pipes

Used to enable you to redirect the flue pipe in the direction of your choice. 

This connection will fit the BTV-3k, 4k, and 5k stove.

Also known to fit other models that have a 60mm flue pipe.

Choose from a variety of lengths and angles - 90° / 45° / 325mm / 500mm / 1000mm

These are sold as singles. Choose your desired quantity at checkout.

 

Please note that fittings do not provide a watertight fit. High heat seals, tapes, and lubricants should be used when fitting to prevent water from entering.

 

 

The perfect solution to protect your groundsheet against dirt and excessive water.  Pitching on slightly rough ground? Our new groundsheet protector will help take care of things.

The groundsheet protector is a must when pitching for longer than 1 day, if rain is expected, or the grass is muddy and wet.

Our groundsheet protectors are beige

Once you try a groundsheet protector, you will never set up a tent again without one.

• Less cleaning of your Bell Tent.
  
• It Helps keeps your Bell Tent looking cleaner for longer.
  
• No mud, fewer slugs and grass on the bottom of your Bell Tent when taking down.
  
• Makes setting up less hassle.
  
• Makes taking down faster.
  
• Easy to set up - Literally spread out and drop your tent on top.
  

 

Bell Tent Coir Matting 

Our unique and luxurious Bell Tent Coir Matting flooring has been crafted to perfection. Made from premium coir, our coir is perfect when accommodating guests of different ages. 

Coir is slightly rough to the touch (like a doormat), but definitely a must when appearance and overall finish to your Bell Tent is concerned. 

Our weave type is also compact enabling the Bell Tent Coir Matting to be folded and rolled up into tight 40 x 40 x 40 bundles for sizes 4m,5m.  

All Bell Tent mats come as two halves.

1 half mat = Half moon

2 half mats = Full Moon

Simply place 2 x half mats together for a seamless full moon effect floor covering. 

 

Bell Tent Coir matting help add a luxurious Glamping style feel to your bell tent by filling your Bell tent with warmth and a homely feeling.  

There are other benefits to having coir mats inside your bell tent: 

 

• Helps protect the groundsheet from rips and tears
• Takes the chill off the ground
• Hides dirt very well by collecting dust and soil underneath the coir matting which goes unnoticeable until you pack away. (less cleaning) 
• Easy to clean  (simply brush down)
• Keeps your groundsheet nice and flat
• Adds warmth to your tent

60mm Double Wall Stove Flue Pipes (Outer Diameter of 100m)

Used to enable you to redirect the flue pipe in the direction of your choice. 

This connection will fit the BTV-3k, 4k, and 5k stove.

Also known to fit other models that have a 60mm flue pipe.

Choose from a variety of lengths and angles - 90° / 45° / 325mm / 500mm / 1000mm

These are sold as singles. Choose your desired quantity at checkout.

 

Please note that fittings do not provide a watertight fit. High heat seals, tapes, and lubricants should be used when fitting to prevent water from entering.

Bell Tent Flue Flashing Kit For Wood Burners & Stoves

FLA-45:

• This kit is OVAL, Not circular!

• 2 predrilled circular clamping rings

• 1 pre-drilled silicone seal

• 8 wing nuts

• 16 washers

• Width / 220mm

• Length / 310mm

• Clamping Plate width - 50mm

• Maximum Flue Pipe Size 100mm -110mm.

• Find magnetic thermostats in our store.

• This flashing works well with pipe sizes from 60mm.
  

 

FLA-Mini:

• NOT suitable for our double-wall pipes

• For flue pipes from 45- 85mm

• 2 predrilled circular clamping rings

• 1 predrilled silicone seal

• 6 bolts and screws

• 12 washers

• Circle - 112mm total circumference 

• Clamping Plate width - 21mm

• This Bell Tent Flue Flashing Kit works well with pipe sizes from 60mm.

 

FLA-Large:

• 2 predrilled circular clamping rings

• 1 predrilled silicone seal

• 6 bolts and screws

• 12 washers

• Circle - 240mm total circumference

• Clamping Plate width - 21mm

• This flashing works well with pipe sizes from 75mm.

 

Our Bell Tent Flue Flashing Kit For Wood Burners & Stoves is a perfect piece of kit, used for Bell Tents, Tipi's Yurts, log cabins, sheds, boats, boathouses, summerhouses, workshops, garages, and many other applications. 

Our Wood burner, stove Flashing Kit allows you to safely install a wood burner/stove in a location that suits you. Specially designed for use in Bell tents, yurts, tipi boats, cabins, and much more.

Specially formatted high heatproof silicone rubber enables up to a 45-degree angle on exit which makes this flashing perfect for most installs. 

The new pre-drilled clamp allows for easy installation on fireproofed fabrics that are often Bell tents, Yurts, Tipi, etc. Simply unscrew the 2 clamping plates, and reconnect after cutting your screw holes in the fabric for a fast and pleasant installation. 10mins.    

 

Operating temperature - 

Safe operating  100° degrees - Max 200 ° (Short period of time)

A flashing kit should be installed with a minimum distance of 150cm from the stove to allow sufficient cooling. We advise that all flue pipes should be fitted with a double wall heat reducer flue attachment when using this product! (We have these available to order).

Always wear gloves when installing the kit as it may have sharp edges on the inner plate.

Find magnetic thermostats in our store to ensure that you are not overheating your flue pipes. 

We do not accept any liability for loss or damage incurred by the use of the flashing kit howsoever caused. 

 

BTV 3 - Premium Luxury Cotton Canvas Bell Tent With Stove Hole

Summary

• 360 GSM Cotton Canvas
• Fire Retardant - European Standards
• Waterproofed, UV, Mould Resistant 
• Chunky Wooden Guy Rope Sliders
• Thick 7MM Anti Rot Guy Ropes
• Rip Stop PVC 540GSM Zipped In Ground Sheet 
• Heavy Duty Steel Groundsheet Pegs
• Roll Up Sides 
• Mosquito Mesh On All Windows & Doors
• Inner Attachments Ready
• Complete With All Pegs, Poles, Ropes & Carry Sack
• 1 Year Warranty  

Our BTV series 3 Fire Retardant Premium Luxury Cotton Canvas Bell Tent With Stove Hole is all you need this summer to rouse holiday spirits. Crafted to the highest standard and available in an array of sizes from- 4m, 5m, 6m, 7m. Our Fire Retardant Premium Luxury Cotton Canvas Bell Tent With Stove Hole Range will help you feel at home whilst away. Crafted from premium, thick, natural, lightly dyed cotton to help keep your Bell Tent looking cleaner for longer.

Now with an added stove hole and a neat stove cover flap that can be used to cover the hole when your stove shoot is not in use. 

Smart natural waterproofing solutions help keep your Bell Tent waterproof inside whilst regulating the temperature efficiently leaving inside feeling cosy, warm and tranquil.

Fire Retardant, UV, Mould and Water repellent treated to ensure that all our Fire Retardant Premium Luxury Cotton Canvas Bell Tent With Stove Hole can withstand harsh UK weather conditions. 

"There is nothing quite like camping in our  Fire Retardant Premium Luxury Cotton Canvas Bell Tent With Stove Hole"

Notes about fabric

Our Fire Retardant range has an approximate GSM weight of 350- 370 GSM. The weighted frequency of the fabric may differ slightly due to the fire retardant treatment. 

Please note, our tents may appear slightly lighter on images. 

 

Take a quick sneak peek... 

New luxury bell tent in thick 360gsm canvas blackout mosquito mesh doors and windows from Bell Tent Village Bell Tents on Vimeo.